Inspect the tipper body for damages, cracks or deformations. Grease all lubrication points such as pivot brackets, stabilizer hinge, hydraulic cylinder joints both at the piston eye and by the chassis bracket. Check the protection wood on the subframe and the liner plates, replace if needed. Check all lamps on the truck. Listen for unusual sounds and noises.
Check and tighten the bolts to the correct torque on the subframe attachment brackets, the hydraulic cradle mount and the pivot brackets. Do a more thorough inspection for cracks in welds on a clean body and subframe. Check hydraulic oil for dirt, oil filter, air breather filter.
Check torque arm nut and bolts, check torque arm bushes and equalizer bushes, grease sliding parts of leaf spring, conduct wheel alignment.
For more detailed instructions on how to carry out the service and maintenance procedures, download the PDF ”Service and Maintenance XMOR™ 21.5 m3 mining tipper”.