XMOR® BHC buckets are designed for 50 tonne machines.
Made to tackle abrasive conditions with small to medium rocks.
All buckets carry a Hardox® In My Body certification.
The XMOR® BHX Bucket is made for well blasted limestone, overburden material, sand, gravel, rock, and coal quarrying. Its low weight enables more payload without exceeding the suspended load capacity of the excavator.
New patented design and the use of Hardox® and Strenx® steels contribute to weight savings, which can be used to make the bucket larger than traditional buckets. That’s why an XMOR® BHX can give a capacity increase of up to 15% compared to standard OEM bucket, moving from 2.8 m3 to 3.3 m3 for a 50-tonne class excavator.
We took a hard look at the issues that mining and earthmoving operations were facing and found many ways to make things better. We turned these ideas into XMOR® features that are all about helping you out.
This proven and unique XMOR® feature serves the dual purpose of distributing the material smoothly inside the bucket and keeping the external plate away from the material, thus reducing wear.
Optimum performance in all of these features is made possible by using the quality SSAB materials Hardox® wear plate and Strenx® performance steel.
The Wear Strip is made from Hardox® wear steel and provides wear resistance in this critical area.
An optional liner plate which is placed in front of the Inverted Keel, adding protection to the inside of the bucket.
Wing Shrouds are manufactured to suit straight side fronts. These parts can be made to fit various thicknesses.
Made from Strenx® high-strength steel to provide structural strength. Can accommodate connections for virtually any brand of excavator.
The flat Cutting Edge can accommodate various GET options, which gives protection against rocks and wear.
The new XMOR® Heel Blox are versatile mechanically attached wear blocks to provide additional protection. They can be fitted to any flat high wear application.
XMOR® BHX bucket comes with a Hardox® In My Body certification. This sign of quality ensures that the design and manufacturing is of the highest standards, and that it’s made with Hardox® wear steel.
The XMOR® range of products also includes a mining tipper body. It improves productivity thanks to its innovative design and use of Hardox® wear steel for enhanced wear resistance and structural integrity.
If your would like to know more about our offering, please fill in the form and we will contact you. Your contact request may also be processed and responded by SSAB´s external XMOR® partners.