Inspection of liner plates
Inspect the liner plates on a weekly basis for damage and excessive wear. The liners is placed in the areas of the tipper with the highest wear rate. If the plates is starting to peal off or detaching from the welds then order new plates and plan for a scheduled relining maintenance. If the plates is worn down, missing or partly worn away then replace the liners as soon as possible. The parts can be ordered thru your XMOR® partner according to the part numbers specified in the figures below.
Types of liner package
There is three types of liner package for the XMOR® tipper body.
Rear & side standard liner package
This is the standard package delivered on the body. The reason for this package is to prevent the excessive wear that is normal in the rear end due to sliding material before and over the scow.
Heavy duty full liner package (full kit)
The full liner package is used when very abrasive material and larger fraction size is handled. The kit can also be retrofitted on the bodies with standard package.