This backhoe buckets are targeting large size excavators where increased productivity in digging adds value to the process. The low weight of the buckets enable increased payload of 10-20% without increasing excavator suspended load.
FIND A SUPPLIER CONTACT US DOWNLOAD BROCHURE
XMOR® BHB buckets are designed for 80-300 tonne machines.
Made to tackle abrasive conditions with small to medium rocks.
All buckets carry a Hardox® In My Body certification.
XMOR® BHB Buckets have several innovative and patented features that make the buckets more effective and durable. The Inverted Keel is one example. It offers less resistance in operation, better flow of material, and a more favorable distribution of stresses.
The XMOR® BHB provides a productivity increase of up to 20 % from higher payload without increasing suspended load on the excavator. This is equal to 15-30 % reduction of steel in the bucket.
XMOR® BHB buckets are targeting large size excavators where increased productivity in digging adds value to the process. The low weight of the buckets enable increased payload of 10–20% without increasing excavator suspended load.
Choosing an XMOR® BHB Bucket with innovative patented features and optimal Hardox® materials can often allow a machine to perform like a bigger class of machine.
Let’s take a common class 80 ton machine, it has a bucket capacity of around 7 yd3 and weights around 9000 lbs. It is loading common dry dirt.
Staying in the weight class, XMOR® BHB 80 could increase the capacity to 7.95 yd3 without stressing the machine with additional weight.
However, if the site conditions allow, XMOR® BHB 90 could increase the capacity to as much as 8-27 yd3. That’s 18% increase. Now the class 80 ton machine is performing like a class 90 ton.
There are multiple advantages associated with this feature. Such as reduced resistance in operation, optimal material flow and distribution of stresses.
The curved cutting edge moves the weld away from the area of highest stress, increasing structural integrity while accommodating natural flex to alleviate stress points. This also allows for a thinner cutting edge, so you cut into material easier.
The corner cavity reduces the weight by avoiding the traditional doubling of material. The cavity is covered by our Mechanical Heel Shroud.
Being mechanically attached these reduce maintenance and downtime. Our Mechanical Heel Shroud covers the cavity.
Attached with bolts, these Wing Shrouds are designed to fit the curved edge and protect the weld point of the cutting edge. They are reversible.
This provides structural support while still reducing the amount of steel used, which in turn reduces weight. The lack of a single horizontal channel allows optimal material flow, opening the mouth wider to accept material easier.
In more abrasive operations a little more protection is often required for the leading point of the Inverted Keel.
All of this made possible by taking optimal advantage of the qualities of Hardox® wear plate and Strenx® performance steel from SSAB.
Utilize the bucket selector to find the perfect XMOR® BHB Bucket for your needs. Just input some information about your bucket and machine, and we’ll introduce a bucket that can handle larger loads with less weight.
Revitalize your XMOR® BHB Bucket using our service and rebuild kits. The parts in these kits are meticulously designed to fit your bucket. All components feature the same hard and tough Hardox® wear plate found in the original parts.
If you would like to know more about our offering, please fill in the form and we will contact you. Your contact request may also be processed and responded by SSAB’s external XMOR partners.
International (English)
South Africa (English)